Authorized by General Motors, the 1:24 Chevrolet Colorado remote control model from FMS accurately captures the performance and handling advantages of the prototype vehicle. The chassis is made of high-strength nylon and the mid-mounted power unit has a low center of gravity, integrating the 2-speed gearbox, transfer case, and 370 high-speed brushed motor into one. The power is transmitted to the front and rear axles through the universal joint drive shaft, and the large, hollow tires can provide good shock absorption effect. The two-speed gearbox switched by the third channel of the remote control can provide powerful torque and support high- speed off-road driving. Features: ● READY TO RUN MODEL What's in Box: 1 x 1/24 FMT24 Chevrolet Colorado RTR Need to Complete: 4 x AAA Batteries for Transmitter Specification: ● Length: 239mm Item# FMS12421BDRTRBK Barcode: 91789046381FMS FMT24 Series - 1:24 Chevrolet Colorado RTR
The RTR (Ready-to-Run) version contains everything you need - transmitter (requires battery), receiver, ESC, motor, servo and USB charger. There are three paint schemes to choose from. With your adventurous and free-spirited heart, embark on your off-road journey!
● TWO SPEED TRANSMISSION
● BALL BEARINGS FULL SET
● SILK SCREEN PRINTING PC BODY
● METAL GEARS STEERING SERVO
● FOUR WHEEL INDEPENDENT SUSPENSION
● FRONT & REAR AXLE PLANETARY GEAR DIFFERENTIALS
● RAPID SEPARATION CAR BODY
● PAINTED BODY
● ORIGINAL PERSONALIZED STICKERS
● 2.4GHz RADIO
1 x G3 V3 transmitter
1 x R3B receiver with ESC group control board (installed)
1 x 370 Brushed motor (installed)
1 x 13g metal servo (installed)
1 x 9g servo (installed)
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual
● Width: 161mm
● Height: 108mm
● Wheelbase: 140mm
● Tire F/R : D: 64.8mm, W: 33.4mm
● Minimum Ground Clearance: 37mm
● Approach Angle: 66°
● Departure Angle: 53 °
● Motor: 370 Brushed motor
● Servo: 13g metal servo x 1, 9g servo x 1
● Remote Control Distance: 80m
● Approx. Operating Duration Time: 20mins
● Remote Control: G3 V3+ R3B transmitter, receiver with ESC group control board
Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.
Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.
Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.
Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.
